ใบปลิว L&E - หน้า 169 - หมดเขตใช้สิทธิ์ *

1 ... 169 ... 281
L&E ใบปลิว  หน้า 169
1 ... 169 ... 281

เลื่อนดูใบปลิว L&E ที่ใช้ได้ตั้งแต่ - ถึง - เพื่อดูข้อเสนอล่าสุด ในหน้า 280 ของโฆษณารายสัปดาห์ฉบับปัจจุบัน คุณจะพบสินค้าที่ดีที่สุดจากหมวดหมู่ เครื่องใช้ไฟฟ้า ใบปลิว L&E นี้มอบส่วนลดให้สินค้ามากกว่า ประหยัดเมื่อไปช็อปปิ้งครั้งต่อไปที่ L&E อย่าลืมดูใบปลิวทั้งหมดตั้งแต่หน้า 1 ถึงหน้า 280  หากคุณต้องการซื้อสินค้าอย่างฉลาดและประหยัดในการช็อปปิ้งครั้งต่อไปที่ L&E อย่าพลาดใบปลิวประจำสัปดาห์ล่าสุดที่เต็มไปด้วยราคาและส่วนลดสุดพิเศษ กลับมาที่ Th Offer ทุกวันเพื่อไม่พลาดโปรโมชั่นดีๆ จากร้านค้าปลีกที่คุณชื่นชอบ

* ใช้ได้ในทุกร้านค้า L&E
 
 
ICON LEGENDS Tri-Colour RGB LEDs Also called 3-in-1, RGB LEDs have red, green and blue emitters to produce the RGB additive Colour Spectrum and white. Quad Colour RGBA/RGBW LEDs Also called 4-in-1, quad colour LEDs add amber to the RGB spectrum for increased saturation, or white for improved contrast and definition. ILDA This laser fixture can be controlled with any ILDA-compatible controller. Pan & Tilt This moving head fxture features two high-speed high-torque motors for horizontal and vertical rotation (pan and tilt) which are controllable independently. LED Technology LEDs are extremely advantageous for the use in lighting systems: they are bright, emit very little heat, have a very long lifetime and low energy consumption. Also, LED fixtures often weigh less than conventional fixtures. Scan Fail System This laser fixture features a scan fail system. To provide safe audience scanning and prevent eye damage, the scan fail circuit shuts the laser down when a malfunction or scanner failure is detected, e.g. the display of a single dot beam. 5-in-1 LED These fixtures add amber and white to the RGB spectrum for increased saturation, and white for improved contrast and definition. Laser Light Due to its remarkable directional quality laser light maintains brightness and visibility over long distances. Producing tightly focused, narrow beams that are perfect for impressive lighting effects, Laser Sources are extremely energy-efficient. Eco-Friendly With highly efficient energy use, a very long LED lifetime and low heat emission, this fixture is environmentally friendly. Analog Modulation This laser fixture features analog beam modulation. Analog modulation allows you to continuously and smoothly vary the beam intensity. An RGB laser is capable of generating 16.7 million colors with analog modulation while TTL modulated lasers provide only 7 colours and no color fading. 6-in-1 LED These fixtures add amber, white and UV to the RGB spectrum for increased saturation, and white for improved contrast and definition. UV or black lights are employed for decorative and artistic lighting effects. Android Compatible This fixture is delivered with a software allowing control via Android devices. DMX512 Created in 1986, DMX512 is a communications standard for lighting equipment. Up to 32 DMX fixtures can be daisy-chained and controlled by a dedicated source, e.g. a lighting console. In a DMX512 daisy chain “network”, the controller is called “master” while the daisy-chained fixtures are the “slaves.” RGB Additive Colour System Additive colour mixes use varying amounts of red, green and blue to produce other colours and white. The RGB system is used in television, computer monitors and digital cameras to name a few. Infrared Remote Control Featuring an IR sensor, this fixture allows control with a handheld IR remote. Mac OS and iOS Compatible This fixture is delivered with a software allowing control via Mac OS X and iOS. “Master” and “Slave” Simply put, this fixture is able to control or be controlled by other fixtures. In “master” Mode and first in a chain, the fixture acts as a controller for fixtures (“slaves”) that are connected to its output. In “slave” Mode, the input of the fixture is connected to the output of a lighting console or “master.” Fixtures that are daisy-chained to a slave’s output also act as slaves. RGB Additive Colour System Plus Amber LEDs Amber is a pure colour outside the RGB spectrum. Adding amber LEDs to the RGB system produces deeper, warmer, more saturated colours. Remote Foot Controller This fixture allows control with a remote foot controller. Windows Compatible This fixture is delivered with a software allowing control via computers running on Windows. Sound Control In “sound to light” Mode, the fixture is controlled by a built-in microphone capturing sounds to activate colour changes, e.g. the beat of the music. RGB Additive Colour System Plus White LEDs Adding white LEDs to the RGB system produces more contrast and definition and enhances the RGB generated white and pastel colours. Cable Remote This fixture allows control with a cable remote controller. Zoom Function This fixture features a motorized or manual zoom to vary its Beam Angle. Standalone Mode In “standalone” Mode, this fixture uses built-in programmes to control its functions. There is no need for a lighting console or “master” controller. RGBWA RGB additive colour system plus white and amber LEDs. Cold White “Cold white“ is a clean, very bright light in the 5,000 - 10,000 K range with a somewhat artifcial touch that goes well with deeply saturated primary colours. Measured in Degrees of Kelvin (K), Colour Temperature indicates the properties of light sources. Multiple Angles This fixture provides multiple beam angles and shapes using the included or optional light shaping diffusers. Strobe Lighting Strobe lights emit a large number of periodic flashes per second seemingly freezing the movement of objects thus creating the illusion of slow motion. COB LED Technology The “chip-on-board” multi-LED array is a recent technology that produces a high-density large-area light source with high brightness and uniform diffusion for a rich wash of colours. Warm White “Warm White“ is in the 2,000 - 4,000 K range providing a soft light with a slight touch of yellow that is natural and pleasing to the eye. Measured in Degrees of Kelvin (K), Colour Temperature indicates the properties of light sources. Single Pixel Control This device features single pixel control. With individual LED pixel on / off status and colour control this fixture is capable of creating animated patterns and video panel style pixel-mapping effects. Ingress Protection Rating of 65 The IP code rates the degree of protection against the intrusion of solid objects, water and access to hazardous parts. This fixture is completely protected against hazardous contact, water jets and ingress of dust. RDM-Enabled This fixture is RDM-enabled. The Remote Device Management protocol extension to DMX allows bi-directional communication over a standard DMX network for the convenient configuration, management and monitoring of RDM devices connected to a dedicated RDM controller. Dust Proof Housing This laser fixture features a dust proof enclosure. The dust proof housing provides effective sealing against the intrusion of dust and particles. This improves performance and minimizes maintenance. UV UV or black lights are employed for decorative and artistic lighting effects. Unlimited Rotation This moving head fixture features two high-speed high-torque motors for infinite horizontal and vertical rotation (pan and tilt). 166 UNLIMITED ROTATION MULTIPLE ANGLES 167

ใบปลิวจาก L&E

ใบปลิว L&E

L&E ใบปลิว  - 10/01/2565 - 13/02/2565
10/01 - 13/02/2565
ใช้ได้ในทุกร้านค้า L&E

ใบปลิว L&E

L&E ใบปลิว
ใช้ได้ในทุกร้านค้า L&E

ใบปลิว L&E

L&E ใบปลิว
ใช้ได้ในทุกร้านค้า L&E

ใบปลิว L&E

L&E ใบปลิว  - 14/01/2565 - 28/02/2565
14/01 - 28/02/2565
ใช้ได้ในทุกร้านค้า L&E

ใบปลิว L&E

L&E ใบปลิว
ใช้ได้ในทุกร้านค้า L&E

ใบปลิว L&E

L&E ใบปลิว  - 01/01/2565 - 28/02/2565
01/01 - 28/02/2565
ใช้ได้ในทุกร้านค้า L&E

ใบปลิว L&E

L&E ใบปลิว
ใช้ได้ในทุกร้านค้า L&E
ใบปลิวที่ได้รับความนิยมที่สุด